Investigations on the influence of a forming gas anneal on the mechanical properties of the printed Ag Thick Film front side contact of solar cells after cofiring

Kurzanzeige
dc.contributor.authorOhl, Sybille
dc.contributor.authorSchubert, Gunnardeu
dc.contributor.authorHorzel, Jörgdeu
dc.contributor.authorHahn, Giso
dc.date.accessioned2011-03-22T17:52:27Zdeu
dc.date.available2011-03-22T17:52:27Zdeu
dc.date.issued2007deu
dc.description.abstractThe beneficial effect of a forming gas anneal (FGA) in hydrogen atmosphere on the fill factor (FF) of screen printed solar cells has been shown previously [1, 2]. In this contribution the effect of a FGA on the mechanical properties of the silver printed front side contact of solar cells is investigated for most relevant wafer surfaces (mc, Cz, EFG, each flat as well as textured). In particular, the adhesion of the busbar to the surface of the silicon wafer is examined by using standardized pull test conditions after soldering pre-soldered Cu-ribbons onto the busbars of the solar cells. It was found that the FGA has no significant influence on the mechanical properties of the busbars including the adhesion strength. Samples which experienced higher than optimal firing conditions show slightly higher adhesion strength and a wider distribution of the forces needed to detach the busbar.eng
dc.description.versionpublished
dc.identifier.citationThe compiled state-of-the-art of PV solar technology and deployment : 22nd European Photovoltaic Solar Energy Conference, EU PVSEC ; proceedings of the international conference, held in Milan, Italy, 3 - 7 September 2007. - Munich : WIP-Renewable Energies, 2007, pp. 1573-1577deu
dc.identifier.ppn507857852
dc.identifier.urihttp://kops.uni-konstanz.de/handle/123456789/953
dc.language.isoengdeu
dc.legacy.dateIssued2010deu
dc.rightsterms-of-use
dc.rights.urihttps://rightsstatements.org/page/InC/1.0/
dc.subjectannealingdeu
dc.subjectcontactdeu
dc.subjectmanufacturing and processingdeu
dc.subjectadhesiondeu
dc.subjectsolderdeu
dc.subjectinterconnectdeu
dc.subject.ddc530deu
dc.titleInvestigations on the influence of a forming gas anneal on the mechanical properties of the printed Ag Thick Film front side contact of solar cells after cofiringeng
dc.typeINPROCEEDINGSdeu
dspace.entity.typePublication
kops.citation.bibtex
@inproceedings{Ohl2007Inves-953,
  year={2007},
  title={Investigations on the influence of a forming gas anneal on the mechanical properties of the printed Ag Thick Film front side contact of solar cells after cofiring},
  publisher={WIP-Renewable Energies},
  address={Munich},
  booktitle={The compiled state-of-the-art of PV solar technology and deployment : 22nd European Photovoltaic Solar Energy Conference, EU PVSEC ; proceedings of the international conference, held in Milan, Italy, 3 - 7 September 2007},
  pages={1573--1577},
  author={Ohl, Sybille and Schubert, Gunnar and Horzel, Jörg and Hahn, Giso}
}
kops.citation.iso690OHL, Sybille, Gunnar SCHUBERT, Jörg HORZEL, Giso HAHN, 2007. Investigations on the influence of a forming gas anneal on the mechanical properties of the printed Ag Thick Film front side contact of solar cells after cofiring. EU PVSEC. Milan, Italy, 3. Sept. 2007 - 7. Sept. 2007. In: The compiled state-of-the-art of PV solar technology and deployment : 22nd European Photovoltaic Solar Energy Conference, EU PVSEC ; proceedings of the international conference, held in Milan, Italy, 3 - 7 September 2007. Munich: WIP-Renewable Energies, 2007, pp. 1573-1577deu
kops.citation.iso690OHL, Sybille, Gunnar SCHUBERT, Jörg HORZEL, Giso HAHN, 2007. Investigations on the influence of a forming gas anneal on the mechanical properties of the printed Ag Thick Film front side contact of solar cells after cofiring. EU PVSEC. Milan, Italy, Sep 3, 2007 - Sep 7, 2007. In: The compiled state-of-the-art of PV solar technology and deployment : 22nd European Photovoltaic Solar Energy Conference, EU PVSEC ; proceedings of the international conference, held in Milan, Italy, 3 - 7 September 2007. Munich: WIP-Renewable Energies, 2007, pp. 1573-1577eng
kops.citation.rdf
<rdf:RDF
    xmlns:dcterms="http://purl.org/dc/terms/"
    xmlns:dc="http://purl.org/dc/elements/1.1/"
    xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
    xmlns:bibo="http://purl.org/ontology/bibo/"
    xmlns:dspace="http://digital-repositories.org/ontologies/dspace/0.1.0#"
    xmlns:foaf="http://xmlns.com/foaf/0.1/"
    xmlns:void="http://rdfs.org/ns/void#"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema#" > 
  <rdf:Description rdf:about="https://kops.uni-konstanz.de/server/rdf/resource/123456789/953">
    <dc:contributor>Hahn, Giso</dc:contributor>
    <dcterms:issued>2007</dcterms:issued>
    <dc:rights>terms-of-use</dc:rights>
    <dc:contributor>Schubert, Gunnar</dc:contributor>
    <dcterms:hasPart rdf:resource="https://kops.uni-konstanz.de/bitstream/123456789/953/1/Ohl_opus-122194.pdf"/>
    <dcterms:isPartOf rdf:resource="https://kops.uni-konstanz.de/server/rdf/resource/123456789/41"/>
    <dcterms:bibliographicCitation>The compiled state-of-the-art of PV solar technology and deployment : 22nd European Photovoltaic Solar Energy Conference, EU PVSEC ; proceedings of the international conference, held in Milan, Italy, 3 - 7 September 2007. - Munich : WIP-Renewable Energies, 2007, pp. 1573-1577</dcterms:bibliographicCitation>
    <dcterms:rights rdf:resource="https://rightsstatements.org/page/InC/1.0/"/>
    <dcterms:available rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2011-03-22T17:52:27Z</dcterms:available>
    <dcterms:title>Investigations on the influence of a forming gas anneal on the mechanical properties of the printed Ag Thick Film front side contact of solar cells after cofiring</dcterms:title>
    <dc:creator>Horzel, Jörg</dc:creator>
    <void:sparqlEndpoint rdf:resource="http://localhost/fuseki/dspace/sparql"/>
    <dspace:isPartOfCollection rdf:resource="https://kops.uni-konstanz.de/server/rdf/resource/123456789/41"/>
    <dc:contributor>Horzel, Jörg</dc:contributor>
    <dc:creator>Schubert, Gunnar</dc:creator>
    <dc:creator>Ohl, Sybille</dc:creator>
    <dc:date rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2011-03-22T17:52:27Z</dc:date>
    <dc:contributor>Ohl, Sybille</dc:contributor>
    <dspace:hasBitstream rdf:resource="https://kops.uni-konstanz.de/bitstream/123456789/953/1/Ohl_opus-122194.pdf"/>
    <dc:creator>Hahn, Giso</dc:creator>
    <dcterms:abstract xml:lang="eng">The beneficial effect of a forming gas anneal (FGA) in hydrogen atmosphere on the fill factor (FF) of screen printed solar cells has been shown previously [1, 2]. In this contribution the effect of a FGA on the mechanical properties of the silver printed front side contact of solar cells is investigated for most relevant wafer surfaces (mc, Cz, EFG, each flat as well as textured). In particular, the adhesion of the busbar to the surface of the silicon wafer is examined by using standardized pull test conditions after soldering pre-soldered Cu-ribbons onto the busbars of the solar cells. It was found that the FGA has no significant influence on the mechanical properties of the busbars including the adhesion strength. Samples which experienced higher than optimal firing conditions show slightly higher adhesion strength and a wider distribution of the forces needed to detach the busbar.</dcterms:abstract>
    <foaf:homepage rdf:resource="http://localhost:8080/"/>
    <bibo:uri rdf:resource="http://kops.uni-konstanz.de/handle/123456789/953"/>
    <dc:language>eng</dc:language>
  </rdf:Description>
</rdf:RDF>
kops.conferencefieldEU PVSEC, 3. Sept. 2007 - 7. Sept. 2007, Milan, Italydeu
kops.date.conferenceEnd2007-09-07
kops.date.conferenceStart2007-09-03
kops.description.openAccessopenaccessgreen
kops.flag.knbibliographytrue
kops.identifier.nbnurn:nbn:de:bsz:352-opus-122194deu
kops.location.conferenceMilan, Italy
kops.opus.id12219deu
kops.sourcefield<i>The compiled state-of-the-art of PV solar technology and deployment : 22nd European Photovoltaic Solar Energy Conference, EU PVSEC ; proceedings of the international conference, held in Milan, Italy, 3 - 7 September 2007</i>. Munich: WIP-Renewable Energies, 2007, pp. 1573-1577deu
kops.sourcefield.plainThe compiled state-of-the-art of PV solar technology and deployment : 22nd European Photovoltaic Solar Energy Conference, EU PVSEC ; proceedings of the international conference, held in Milan, Italy, 3 - 7 September 2007. Munich: WIP-Renewable Energies, 2007, pp. 1573-1577deu
kops.sourcefield.plainThe compiled state-of-the-art of PV solar technology and deployment : 22nd European Photovoltaic Solar Energy Conference, EU PVSEC ; proceedings of the international conference, held in Milan, Italy, 3 - 7 September 2007. Munich: WIP-Renewable Energies, 2007, pp. 1573-1577eng
kops.title.conferenceEU PVSEC
relation.isAuthorOfPublication733cb909-c049-4af2-8d6c-9789dd99815c
relation.isAuthorOfPublicatione82405a2-e86b-44d7-8126-8cfdd7e627c9
relation.isAuthorOfPublication.latestForDiscovery733cb909-c049-4af2-8d6c-9789dd99815c
source.bibliographicInfo.fromPage1573
source.bibliographicInfo.toPage1577
source.publisherWIP-Renewable Energies
source.publisher.locationMunich
source.titleThe compiled state-of-the-art of PV solar technology and deployment : 22nd European Photovoltaic Solar Energy Conference, EU PVSEC ; proceedings of the international conference, held in Milan, Italy, 3 - 7 September 2007

Dateien

Originalbündel

Gerade angezeigt 1 - 1 von 1
Vorschaubild nicht verfügbar
Name:
Ohl_opus-122194.pdf
Größe:
352.11 KB
Format:
Adobe Portable Document Format
Beschreibung:
Ohl_opus-122194.pdf
Ohl_opus-122194.pdfGröße: 352.11 KBDownloads: 160

Sammlungen

Physik: Publikationen