KOPS - Das Institutionelle Repositorium der Universität Konstanz

Relationship between diffusion parameters and phosphorus precipitation during the POCL3 diffusion process

Relationship between diffusion parameters and phosphorus precipitation during the POCL3 diffusion process

Zitieren

Dateien zu dieser Ressource

Prüfsumme: MD5:b02d1a206092493d8b008912d042cb71

DASTGHEIB-SHIRAZI, Amir, Michael STEYER, Gabriel MICARD, Hannes WAGNER, Pietro P. ALTERMATT, Giso HAHN, 2013. Relationship between diffusion parameters and phosphorus precipitation during the POCL3 diffusion process. In: Energy Procedia. 38, pp. 254-262. ISSN 1876-6102. eISSN 1876-6102

@article{Dastgheib-Shirazi2013Relat-25023, title={Relationship between diffusion parameters and phosphorus precipitation during the POCL3 diffusion process}, year={2013}, doi={10.1016/j.egypro.2013.07.275}, volume={38}, issn={1876-6102}, journal={Energy Procedia}, pages={254--262}, author={Dastgheib-Shirazi, Amir and Steyer, Michael and Micard, Gabriel and Wagner, Hannes and Altermatt, Pietro P. and Hahn, Giso} }

Dastgheib-Shirazi, Amir 2013 Dastgheib-Shirazi, Amir Hahn, Giso Hahn, Giso Relationship between diffusion parameters and phosphorus precipitation during the POCL3 diffusion process Steyer, Michael Energy Procedia ; 38 (2013). - S. 254-262 2013-11-06T13:49:20Z Micard, Gabriel Steyer, Michael The POCl<sub>3</sub> diffusion process is still a common way to create the pn-junction of Si solar cells. Concerning the screen- printing process, it is necessary to find a compromise between low emitter recombination, low contact resistance and high lateral conductivity. The formation of a homogeneous emitter during the POCl3 diffusion process depends on several diffusion parameters, including duration, temperature and gas flow. This primarily controls the growth of the highly doped phosphosilicate glass (PSG) layer, which acts as a dopant source during the diffusion process. Detailed investigations of the PSG layer have shown a distinct correlation between the process gas flows and the composition of the PSG layer. Specifically, in this research we examine the influence of phosphorus precipitation at the PSG/Si interface. Furthermore, we show the influence of phosphorus precipitation during the pre-deposition phase on the passivation quality of the corresponding emitter. In a second step, we use the results to create emitters with a reduced density of phosphorus precipitates. In a last step, the optimized emitter structure was transferred to screen-printed solar cell processes, whereby efficiencies up to 19.4%abs. were achieved on monocrystalline p-type Cz material with full area Al-BSF rear side. Altermatt, Pietro P. Micard, Gabriel Wagner, Hannes deposit-license 2013-11-06T13:49:20Z Altermatt, Pietro P. Wagner, Hannes eng

Dateiabrufe seit 01.10.2014 (Informationen über die Zugriffsstatistik)

Dastgheib-Shirazi_250237.pdf 269

Das Dokument erscheint in:

KOPS Suche


Stöbern

Mein Benutzerkonto