Publikation:

Influence of post-hydrogenation upon electrical, optical and structural properties of hydrogen-less sputter-deposited amorphous silicon

Lade...
Vorschaubild

Dateien

Gerke_0-321533.pdf
Gerke_0-321533.pdfGröße: 1.19 MBDownloads: 471

Datum

2016

Herausgeber:innen

Kontakt

ISSN der Zeitschrift

Electronic ISSN

ISBN

Bibliografische Daten

Verlag

Schriftenreihe

Auflagebezeichnung

ArXiv-ID

Internationale Patentnummer

Angaben zur Forschungsförderung

Projekt

Open Access-Veröffentlichung
Open Access Green
Core Facility der Universität Konstanz

Gesperrt bis

Titel in einer weiteren Sprache

Publikationstyp
Zeitschriftenartikel
Publikationsstatus
Published

Erschienen in

Thin Solid Films. 2016, 598, pp. 161-169. ISSN 0040-6090. eISSN 1879-2731. Available under: doi: 10.1016/j.tsf.2015.11.063

Zusammenfassung

Amorphous silicon (a-Si) is common in the production of technical devices and can be deposited by several techniques. In this study intrinsic and doped, hydrogen-less amorphous silicon films are RF magnetron sputter deposited and post-hydrogenated in a remote hydrogen plasma reactor at a temperature of 370 °C. Secondary ion mass spectrometry of a boron doped (p) a-Si layer shows that the concentration of dopants in the sputtered layer becomes the same as present in the sputter-target. Improved surface passivation of phosphorous doped 5 Ω cm, FZ, (n) c-Si can be achieved by post-hydrogenation yielding a minority carrier lifetime of ~ 360 μs finding an optimum for ~ 40 nm thin films, deposited at 325 °C. This relatively low minority carrier lifetime indicates high disorder of the hydrogen-less sputter deposited amorphous network. Post-hydrogenation leads to a decrease of the number of localized states within the band gap. Optical band gaps (Taucs gab as well as E04) can be determined to ~ 1.88 eV after post-hydrogenation. High resolution transmission electron microscopy and optical Raman investigations show that the sputtered layers are amorphous and stay like this during post-hydrogenation. As a consequence of the missing hydrogen during deposition, sputtered a-Si forms a rough surface compared to CVD a-Si. Atomic force microscopy points out that the roughness decreases by up to 25% during post-hydrogenation. Nuclear resonant reaction analysis permits the investigation of hydrogen depth profiles and allows determining the diffusion coefficients of several post-hydrogenated samples from of a model developed within this work. A dependency of diffusion coefficients on the duration of post-hydrogenation indicates trapping diffusion as the main diffusion mechanism. Additional Fourier transform infrared spectroscopy measurements show that hardly any interstitial hydrogen exists in the post-hydrogenated a-Si layers. The results of this study open the way for further hydrogen diffusion experiments which require an initially unhydrogenated drain layer.

Zusammenfassung in einer weiteren Sprache

Fachgebiet (DDC)
530 Physik

Schlagwörter

AFM, Amorphous silicon, Hydrogen depth profiling, NRRA, Post-hydrogenation, Raman, RF sputter-deposition

Konferenz

Rezension
undefined / . - undefined, undefined

Forschungsvorhaben

Organisationseinheiten

Zeitschriftenheft

Zugehörige Datensätze in KOPS

Zitieren

ISO 690GERKE, Sebastian, Hans-Werner BECKER, Detlef ROGALLA, Florian SINGER, Nils H. BRINKMANN, Susanne FRITZ, Adnan HAMMUD, Philipp KELLER, Daniel SKORKA, Daniel SOMMER, Christof WEISS, Stefan FLEGE, Giso HAHN, Reinhart JOB, Barbara TERHEIDEN, 2016. Influence of post-hydrogenation upon electrical, optical and structural properties of hydrogen-less sputter-deposited amorphous silicon. In: Thin Solid Films. 2016, 598, pp. 161-169. ISSN 0040-6090. eISSN 1879-2731. Available under: doi: 10.1016/j.tsf.2015.11.063
BibTex
@article{Gerke2016Influ-33550,
  year={2016},
  doi={10.1016/j.tsf.2015.11.063},
  title={Influence of post-hydrogenation upon electrical, optical and structural properties of hydrogen-less sputter-deposited amorphous silicon},
  volume={598},
  issn={0040-6090},
  journal={Thin Solid Films},
  pages={161--169},
  author={Gerke, Sebastian and Becker, Hans-Werner and Rogalla, Detlef and Singer, Florian and Brinkmann, Nils H. and Fritz, Susanne and Hammud, Adnan and Keller, Philipp and Skorka, Daniel and Sommer, Daniel and Weiß, Christof and Flege, Stefan and Hahn, Giso and Job, Reinhart and Terheiden, Barbara}
}
RDF
<rdf:RDF
    xmlns:dcterms="http://purl.org/dc/terms/"
    xmlns:dc="http://purl.org/dc/elements/1.1/"
    xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
    xmlns:bibo="http://purl.org/ontology/bibo/"
    xmlns:dspace="http://digital-repositories.org/ontologies/dspace/0.1.0#"
    xmlns:foaf="http://xmlns.com/foaf/0.1/"
    xmlns:void="http://rdfs.org/ns/void#"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema#" > 
  <rdf:Description rdf:about="https://kops.uni-konstanz.de/server/rdf/resource/123456789/33550">
    <dc:rights>terms-of-use</dc:rights>
    <dcterms:abstract xml:lang="eng">Amorphous silicon (a-Si) is common in the production of technical devices and can be deposited by several techniques. In this study intrinsic and doped, hydrogen-less amorphous silicon films are RF magnetron sputter deposited and post-hydrogenated in a remote hydrogen plasma reactor at a temperature of 370 °C. Secondary ion mass spectrometry of a boron doped (p) a-Si layer shows that the concentration of dopants in the sputtered layer becomes the same as present in the sputter-target. Improved surface passivation of phosphorous doped 5 Ω cm, FZ, (n) c-Si can be achieved by post-hydrogenation yielding a minority carrier lifetime of ~ 360 μs finding an optimum for ~ 40 nm thin films, deposited at 325 °C. This relatively low minority carrier lifetime indicates high disorder of the hydrogen-less sputter deposited amorphous network. Post-hydrogenation leads to a decrease of the number of localized states within the band gap. Optical band gaps (Taucs gab as well as E&lt;sub&gt;04&lt;/sub&gt;) can be determined to ~ 1.88 eV after post-hydrogenation. High resolution transmission electron microscopy and optical Raman investigations show that the sputtered layers are amorphous and stay like this during post-hydrogenation. As a consequence of the missing hydrogen during deposition, sputtered a-Si forms a rough surface compared to CVD a-Si. Atomic force microscopy points out that the roughness decreases by up to 25% during post-hydrogenation. Nuclear resonant reaction analysis permits the investigation of hydrogen depth profiles and allows determining the diffusion coefficients of several post-hydrogenated samples from of a model developed within this work. A dependency of diffusion coefficients on the duration of post-hydrogenation indicates trapping diffusion as the main diffusion mechanism. Additional Fourier transform infrared spectroscopy measurements show that hardly any interstitial hydrogen exists in the post-hydrogenated a-Si layers. The results of this study open the way for further hydrogen diffusion experiments which require an initially unhydrogenated drain layer.</dcterms:abstract>
    <dc:contributor>Job, Reinhart</dc:contributor>
    <dc:creator>Rogalla, Detlef</dc:creator>
    <void:sparqlEndpoint rdf:resource="http://localhost/fuseki/dspace/sparql"/>
    <dc:creator>Gerke, Sebastian</dc:creator>
    <dc:contributor>Fritz, Susanne</dc:contributor>
    <dcterms:available rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2016-04-07T14:02:57Z</dcterms:available>
    <dc:contributor>Sommer, Daniel</dc:contributor>
    <dc:contributor>Hammud, Adnan</dc:contributor>
    <dc:contributor>Skorka, Daniel</dc:contributor>
    <dc:contributor>Singer, Florian</dc:contributor>
    <dspace:isPartOfCollection rdf:resource="https://kops.uni-konstanz.de/server/rdf/resource/123456789/41"/>
    <dc:creator>Fritz, Susanne</dc:creator>
    <dc:creator>Brinkmann, Nils H.</dc:creator>
    <dc:creator>Hammud, Adnan</dc:creator>
    <dc:contributor>Brinkmann, Nils H.</dc:contributor>
    <dc:date rdf:datatype="http://www.w3.org/2001/XMLSchema#dateTime">2016-04-07T14:02:57Z</dc:date>
    <dcterms:title>Influence of post-hydrogenation upon electrical, optical and structural properties of hydrogen-less sputter-deposited amorphous silicon</dcterms:title>
    <dc:contributor>Terheiden, Barbara</dc:contributor>
    <dc:creator>Skorka, Daniel</dc:creator>
    <dspace:hasBitstream rdf:resource="https://kops.uni-konstanz.de/bitstream/123456789/33550/1/Gerke_0-321533.pdf"/>
    <dc:contributor>Flege, Stefan</dc:contributor>
    <dc:contributor>Keller, Philipp</dc:contributor>
    <dcterms:rights rdf:resource="https://rightsstatements.org/page/InC/1.0/"/>
    <dc:contributor>Gerke, Sebastian</dc:contributor>
    <dc:creator>Terheiden, Barbara</dc:creator>
    <bibo:uri rdf:resource="https://kops.uni-konstanz.de/handle/123456789/33550"/>
    <dc:language>eng</dc:language>
    <dc:creator>Keller, Philipp</dc:creator>
    <dc:creator>Sommer, Daniel</dc:creator>
    <dc:creator>Weiß, Christof</dc:creator>
    <dc:contributor>Rogalla, Detlef</dc:contributor>
    <dc:contributor>Hahn, Giso</dc:contributor>
    <dc:creator>Hahn, Giso</dc:creator>
    <dc:creator>Singer, Florian</dc:creator>
    <dcterms:issued>2016</dcterms:issued>
    <dc:contributor>Weiß, Christof</dc:contributor>
    <dc:creator>Becker, Hans-Werner</dc:creator>
    <foaf:homepage rdf:resource="http://localhost:8080/"/>
    <dc:creator>Flege, Stefan</dc:creator>
    <dc:creator>Job, Reinhart</dc:creator>
    <dcterms:hasPart rdf:resource="https://kops.uni-konstanz.de/bitstream/123456789/33550/1/Gerke_0-321533.pdf"/>
    <dcterms:isPartOf rdf:resource="https://kops.uni-konstanz.de/server/rdf/resource/123456789/41"/>
    <dc:contributor>Becker, Hans-Werner</dc:contributor>
  </rdf:Description>
</rdf:RDF>

Interner Vermerk

xmlui.Submission.submit.DescribeStep.inputForms.label.kops_note_fromSubmitter

Kontakt
URL der Originalveröffentl.

Prüfdatum der URL

Prüfungsdatum der Dissertation

Finanzierungsart

Kommentar zur Publikation

Allianzlizenz
Corresponding Authors der Uni Konstanz vorhanden
Internationale Co-Autor:innen
Universitätsbibliographie
Ja
Begutachtet
Diese Publikation teilen